Download Print this page
Hide thumbs Also See for ZENTO:

Advertisement

Quick Links

Warranty
The BRIO Zento is covered by a 12 month Warranty from the date of purchase.
The warranty applies to material and manufacturing faults only. Proof of date of
purchase by presenting the original receipt is required, and only applies to the
rst owners and cannot be transferred. This warranty becomes void should the
product have been altered or modi ed in any way.
In the event of a fault, contact your reseller. If the reseller is unable to rectify the
problem the product will be forwarded to the manufacturer along with the
original receipt and a detailed description of the fault reported. The manufac-
turer will not be liable for any other damages than that caused to the product
made by the manufacturer. Any repairs carried out during the warranty period
shall not entitle the purchaser to an extended warranty period.
The warranty shall not apply if:
• Original receipt is not presented as proof of purchase;
• The fault has arisen as a result of misuse or incorrect care that deviates from
that described in the Instruction Manual;
• Repairs have been carried out by a third party;
• The fault has arisen as a result of neglect or accident;
• The serial number has been damaged or removed;
• It is a result of normal wear and tear of parts, harness and/or seat cover that can
be expected from normal day to day use;
• If the vehicle seat is damaged;
• If the warranty terms stated have not been adhered to.
Questions
Contact your reseller or distributor if you have any questions. Make sure you have
the following information available when you call:
• The serial number – located at the top on the back of the seat, under the seat
cover
• Information about the make and model of vehicle in which the BRIO Zento has
been installed
• The age and weight of your child
BRIO New Zealand Distributor:
Play It Safe Ltd. Tel 03-981 1725
email Brio.Support@briocarseats.co.nz
BRIO AB
Box 305
SE-20123 Malmö
www.brio.net
INSTRUCTION MANUAL
FOR BRIO ZENTO
Rear-facing child restraint 0-25 kg
"Semi-universal" approved rear-facing child restraint, as per vehicle list
Forward-facing child restraint 12-18 kg
"Universal" approved
Forward-facing booster seat 15-25 kg
"Universal" approved

Advertisement

loading
Need help?

Need help?

Do you have a question about the ZENTO and is the answer not in the manual?

Questions and answers

Summary of Contents for BRIO ZENTO

  • Page 1 Warranty The BRIO Zento is covered by a 12 month Warranty from the date of purchase. The warranty applies to material and manufacturing faults only. Proof of date of INSTRUCTION MANUAL purchase by presenting the original receipt is required, and only applies to the rst owners and cannot be transferred.
  • Page 2 • Cover the seat if the car is parked in the sun, since plastic and metal parts can become very hot. safety, and the result is a seat that o ers both safety and comfort, and is easy to use. BRIO Zento ful lls the •...
  • Page 3 For an even rmer installation feed the anchor attachment through the tether buckle and back up to the 6-millimeter steel rod at the rear of the BRIO Zento and click in. Tighten straps as much as possible. Feed the vehicle lap-diagonal seat belt through the opening that is marked blue in the picture (blue marking on seat cover), between the seat shell and seat cover and and push it rmly into seat belt buckle.
  • Page 4 Place the BRIO Zento on the vehicle seat and then use the vehicle lap-diagonal seat belt to rmly strap in both child and the seat. The lap portion of the belt should t snuggly over the child’s thighs, and the diagonal belt over the child’s shoulder.