Other Operations - Sony Walkman TCD-D100 Operating Instructions Manual

6
PAUSE
REC
7
PAUSE
PLAY
or
Tips
• To begin recording
immediately, press the
( PLAY button while
pressing the r REC
button in the stop or
playback mode.
• The sampling frequency
is displayed when the
sampling frequency is
changed during
recording and recording
pause.
• If the tape-corder
remains in the pause
mode for five minutes
or longer, the tape-
corder will enter the
stop mode
automatically in order
to protect the head and
tape.
• If the tape-corder
remains in the stop
mode for three minutes
or longer while using
the unit on batteries, the
tape-corder will enter
the low-power
consumption mode
automatically (see page
35) to protect the tape
and to conserve the
battery.
Press the r REC and P PAUSE
buttons.
The tape-corder enters the pause
mode. If only the r REC button is
pressed, the tape-corder enters
the recording monitor mode (see
page 25) and does not begin
recording.
Press either the ( PLAY or
P PAUSE button.
The recording begins.

Other operations

To
Stop recording
Pause recording
Release pause
Check the input source:
in the recording mode
in the recording monitor
mode
in the recording pause
mode
Check the sampling
frequency
Press
p STOP
P PAUSE
P PAUSE or ( PLAY
r REC
Press the button until the
input source display
appears.
( PLAY in the recording
mode until the sampling
frequency is displayed.
Recording
17 EN