Initializing The Unit - Sony DR-BT10CX Operating Instructions Manual

24
us
Low sound level
. . Turn up the volume of this unit.
. . Turn up the volume of the
BLUETOOTH device if the
BLUETOOTH device has a volume
control.
Low sound quality
. . Switch the BLUETOOTH connection
to A2DP (Advanced Audio
Distribution Profile) when HSP
(Headset Profile) is set.
The recipient's voice
cannot be heard.
. . Check that both this unit and the
BLUETOOTH mobile phone are
turned on.
. . Check the connection between this
unit and the BLUETOOTH mobile
phone.
. . Check that output of the
BLUETOOTH mobile phone is set
for this unit.
. . Check that the volume of the unit is
not set too low.
. . Check that the volume of the
BLUETOOTH mobile phone is not
set too low if the BLUETOOTH
mobile phone has a volume control.
~
If you are listening to music using
this unit, stop playback, press the
multi function button and talk.
Low sound from recipient
~
Turn up the volume of this unit.
~
Turn up the volume of the
BLUETOOTH mobile phone if the
BLUETOOTH mobile phone has a
volume control.
Initializing the
unit
You can reset this unit to its default
(such as volume setting) and delete
all pairing information.
1
If this unit is turned on,
press and hold the
POWER button for
about 3 seconds to turn
off this unit.
2
Press and hold the
POWER button and
multi function button
together for about
7 seconds.
The indicator (blue) and
indicator (red) flash together
four times, and this unit is
reset to the default setting. All
pairing information is deleted.