Toshiba DVR80KF Service Manual page 111

STEP START-
/LOC. ING
No. No.
[32] [26] Idler Assembly (HI)
[33] [26] BT Arm
Loading Arm (SP)
[34] [26]
Assembly
Loading Arm (TU)
[35] [34]
Assembly
M Brake (TU)
[36] [16],[26]
Assembly (HI)
M Brake (SP)
[37] [2],[26]
Assembly (HI)
Tension Lever
[38] [37]
Assembly
[39] [38] T Lever Holder
[40] [40] M Gear (HI)
[41] [15],[40] Sensor Gear (HI)
[42] [36],[40] Reel T
[43] [38] Reel S
Moving Guide S
[44] [34],[38]
Preparation
Moving Guide T
[45] [35]
Preparation
[46] [19] TG Post Assembly
[47] [27] Rack Assembly
[48] [47] F Door Opener
[49] [49] Cleaner Assembly
[50] [49] CL Post
↓ ↓
(1) (2)
(1): Follow steps in sequence. When reassembling, follow the steps in reverse order.
These numbers are also used as identification (location) No. of parts in the figures.
(2): Indicates the part to start disassembling with in order to disassemble the part in column (1).
(3): Name of the part
(4): Location of the part: T=Top B=Bottom R=Right L=Left
(5): Figure Number
(6): Identification of parts to be removed, unhooked, unlocked, released, unplugged, unclamped, or desoldered.
P=Spring, W=Washer, C=Cut Washer, S=Screw, *=Unhook, Unlock, Release, Unplug, or Desolder
e.g., 2(L-2) = two Locking Tabs (L-2).
(7): Adjustment Information for Installation
(+):Refer to Deck Exploded Views for lubrication.
PART
Fig. No.
B DM1H, DM14H
B DM2H, DM14H
B DM2H, DM14H
B DM2H, DM14H
T DM1H, DM15H
T DM1H, DM15H
T DM1H, DM15H
T DM15H
T DM1H, DM15H
T DM1H, DM15H
T DM1H, DM15H
T DM1H, DM15H
T DM1H, DM16H
T DM1H, DM16H
T DM1H, DM16H
R DM17H
R DM17H
T DM1H, DM6H
T DM6H
↓ ↓
(3) (4)
REMOVAL
REMOVE/*UNHOOK/
UNLOCK/RELEASE/
UNPLUG/DESOLDER
*(L-9)
*(P-5)
*(P-6)
*(L-10)
(C-6)
(C-7)
(S-11), Slide Plate
*(L-11)
*(L-12)
↓ ↓
(5) (6)
2-4-2
INSTALLATION
ADJUSTMENT
CONDITION
(+)Refer to Alignment
Sec.Page 2-5-1
(+)Refer to Alignment
Sec.Page 2-5-1
(+)Refer to Alignment
Sec.Page 2-5-1
↓
(7)
N25E1AVDA