Download Print this page

Buffalo Tools DUAL-100 Operating Instructions Manual

18 volt dual head drill

Advertisement

Quick Links

DUAL-100
18 Volt Dual Head Drill
Operating Instructions
READ ALL INSTRUCTIONS AND WARNINGS BEFORE USING THIS PRODUCT.
This manual provides important information on proper operation & maintenance. Every effort has been
made to ensure the accuracy of this manual. These instructions are not meant to cover every possible
condition and situation that may occur. We reserve the right to change this product at any time
without prior notice.
IF THERE IS ANY QUESTION ABOUT A CONDITION BEING SAFE OR UNSAFE, DO
NOT OPERATE THIS PRODUCT!
HAVE QUESTIONS OR PROBLEMS? DO NOT RETURN THIS PRODUCT TO THE
RETAILER - CONTACT CUSTOMER SERVICE.
If you experience a problem or need parts for this product, visit our website http://www.buffalotools.com
or call our customer help line at 1-888-287-6981, Monday-Friday, 8 AM - 4 PM Central Time. A copy of
the sales receipt is required.
FOR CONSUMER USE ONLY – NOT FOR PROFESSIONAL USE.
KEEP THIS MANUAL, SALES RECEIPT & APPLICABLE WARRANTY FOR FUTURE
REFERENCE.

Advertisement

loading

Summary of Contents for Buffalo Tools DUAL-100

  • Page 1 DUAL-100 18 Volt Dual Head Drill Operating Instructions READ ALL INSTRUCTIONS AND WARNINGS BEFORE USING THIS PRODUCT. This manual provides important information on proper operation & maintenance. Every effort has been made to ensure the accuracy of this manual. These instructions are not meant to cover every possible condition and situation that may occur.
  • Page 2 PRODUCT SPECIFICATION FOR TWIN-HEAD CORDLESS DRILL...
  • Page 3 TWIN-HEAD CORDLESS DRILL Know your new TWIN-HEAD CORDLESS DRILL...
  • Page 5 The Twin-Head Cordless Drill is fitted with 2 keyless chucks 3-5 hours charger: Plug the adaptor into a suitable mains supply.When the battery is charging,the light is RED,After 3-5h,the light turns from RED to GREEN. Charging is complete.Never charge the battery for longer than 5 hours.Do not take out the battery from the charging base during the charging process till the red light...
  • Page 6 Torque Settings...