Sharp KSH-777DW Service Manual page 8

KSH-777DW
1. Remove the three nuts from the terminal of the fixed for
power supply cord.
2. Remove the cord stopper holder from the body.
1. Turn over the outer pot with inner bowl inside, disclose its bottom cover. Push "Cook" switch, adjust switch lever and
switch contacts.
PUSH THE COOK SWITCH
A Thermostat rod must not be pressed or drew up by switch lever. It should be moving up and down easily.
2. As soon as inner bowl is lifted up from outer pot, switch lever must spring-up. Without inner pot, switch contacts must
touch each other when push switch "Cook".
SWITCH SPRING BACK
3. Ensure the capability of up-down movement of switch lever.
POWER SUPPLY CORD REMOVAL
ADJUSTMENT OF SWITCH LEVER AND CONTACTS
Fig. C-7
GAP
GAP
Fig. C-6
NO GAP
8
Cord stopper
holder
Fig. C-5
THERMOSTAT SPRING BACK
A