6
Use the SS-93 tool for pre-bending the LCD FLEX.
8a
Carefully press the LCD FLEX down.
9
This is the position of the LCD FLEX after the pre-
bending procedure. Make sure the connector is
secure by pressing it.
22
Issue 1
CONFIDENTIAL
Copyright © 2008 NOKIA. All rights reserved.
7
Slide the SS-93 along the FLEX to the LCD.
8b
Do not press the LCD FLEX down too hard because
it can cause sharp curves and break it.
5630 XpressMusic RM-431, RM-432
Service Manual Level 1&2