Bosch WVD24420EU Operating And Installation Instructions page 11

Finish in time
Drying duration or automatic
drying
11
² While the programme is running, the programme
duration may be extended or reduced for the follow-
ing reasons.
Reductions in time occur because of:
– small loads,
– reduced heating times, e.g. if the water is very hot,
– reduced washing temperature after the programme
has started,
– the laundry for drying with low residual moisture.
Increases in time occur because of:
– additional rinse cycle if excessive foam is in the
laundry,
– multiple spinning if the laundry is distributed poorly
in the drum,
– increased heating times, e.g. when the water is too
cold,
– water pressure too low,
– selection of an additional option, e.g. Extra Rinse
O and/or Intensive È after the programme has
started,
– very absorbent washing extends the heating dura-
tion,
– the laundry for drying is wet.
You can select the finish in time, see page 32.
You can set the drying duration or automatic drying by
touching the Dry Š button, see page 28. When the
washing and drying without a break was selected, time
drying or auto drying duration will add in programme
duration automatically. Related programmes will pro-
long 5-15 minutes for good washing performance.