Bosch WVD24420EU Operating And Installation Instructions page 10

* Overdosage
@ Childproof lock
Spin speed
Washing temperature
Programme duration
10
Display
n
Door can be opened
OPE
F:16* Fault displays
* Example of the display
The automatic safety system detects excessive froth in
the appliance due to a highly frothing detergent or an
overdosage. This is indicated in the display field by the
* symbol. Dispense less detergent for the next wash
with similar items of washing (same degree of soiling
and wash load). Overdosage of detergent may cause
excessive froth formation and impair the washing and
rinsing results. A rinse cycle is automatically run.
² The * symbol goes out when the appliance switch-
es off at the end of the programme or if the pro-
gramme is changed.
The activated childproof lock prevents the selected
programme from being changed while the programme
is running.
The default spin speed is displayed depending on the
selected programme and additional functions. You can
change this speed, see page 31.
The default washing temperature is displayed after se-
lecting the programme and it can be changed by
touching the Temp. °C button, see page 31.
When the programme has been selected, the expected
programme duration (time after which the programme
is expected to end) is displayed.
The programme duration is displayed in hours and
minutes, e.g.
1:30 = 1 hour and 30 minutes
0:35 = 35 minutes.
When the programme has started, the programme du-
ration counts down in minutes.
When the programme ends, the displays shows -0-.
Notes
See page 47