JVC SX-L3WD Service Manual page 3

Disassembly method
Removing the front net (See Fig. 1)
1. Remove the front net from the four holders that are
fixing the front net.
Removing the tweeter (See Fig. 2&3)
Removing the front net.
1. Remove the three screws A attaching the tweeter
using a hexagon wrench.
2. Remove the speaker cord (Yellow, Black).
Removing the woofer (See Fig. 2&4)
Removing the front net.
1. Remove the four screws B attaching the woofer
using a hexagon wrench.
2. Remove the speaker cord (Red, Black).
Removing the net walk assembly
Removing the front net.
Removing the tweeter.
Removing the woofer.
1. Remove the sound absorbent material inside of the
speaker box.
2. Remove the four screws C attaching the net walk
assembly.
3. Lift the net walk assembly.
Woofer
Fig. 4
Caution
Care should be taken not to turn the speaker
face down.
Turning the speaker face down may damage the
edges of the speaker.
(See Fig. 5)
Speaker cord
(Red, Black)
Fig. 1
B
Woofer
Fig. 2
Fig. 3
Net walk assembly
C
Fig. 5
SX-L3WD
Holder
Front net
Holder
A
Tweeter
B
Speaker cord
(Yellow, Black)
Tweeter
C
1-3