Configuration - Nokia 6133b User Manual

Lights — to set the lights permanently On. Select
for 15 seconds after a key press.
TTY/TDD > Use TTY >
loopset settings
If your phone is provided with a hearing aid coil, select
hearing aid mode >
aid. The icon is displayed when the

■ Configuration

You can configure your phone with settings that are required for certain services
to function correctly. The services are multimedia messaging, IM, synchronization,
streaming, and browser. Your service provider may also send you these settings.
See "Configuration settings service," p. 11.
Select Menu > Settings
Default config. settings
to a service provider, and select
settings of this service provider support. To set the configuration settings of the
service provider as default settings, select
configuration settings, select Delete.
Activ. default in all apps.
supported applications
Preferred access point
point, and select Options
bearer, and packet data access point or GSM dial-up number.
Connect to serv. support
service provider
Device manager settings
software updates. This option may not be available, depending on your phone.
See "Phone software updates," p. 48.
Personal config. settings
manually and to activate or delete them. To add a new personal account if you
have not added any, select
the service type, and select and enter each of the required parameters. The
parameters differ according to the selected service type. To delete or activate a
personal account, scroll to it, and select
Yes — to use the text phone settings instead of headset or
On to optimize the sound quality when using a T-coil hearing
> Configuration
— to view the service providers saved in the phone. Scroll
Details to view the applications that the configuration
— to activate the default configuration settings for
— to view the saved access points. Scroll to an access
> Details to view the name of the service provider, data
— to download the configuration settings from your
— to allow or prevent the phone from receiving phone
— to add new personal accounts for various services
Add new; otherwise, select
Automatic
Hearing aid
T-coil hearing aid mode
and from the following options:
Options > Set as
Options
Options > Delete or Activate.
S e t t i n g s
to set the lights on
> T-coil
is active.
default. To delete
> Add new. Select
47