Setting The Clock Manually; Setting The Brightness Of The Display; Setting The Clock For The First Time; To Cancel Automatic Dst/Summer Time Adjustment During The Daylight Saving Time (Summer Time) Period - Sony Dream Machine ICF-CD3iP Operating Instructions Manual

l'>i~@@~!O
DATE f SLEEP OFF
To cancel Automatic DST/SummerTime
adjustment during the daylight saving
time (summer time) period
The Automatic DST/Summer Time adjustment
can be canceled.
Press and hold
CLOCK
and
BRIGHTNESS/ TIME
ZONE at the same time while the clock is
displayed.
''Auto
-+
OFF" appears in the display to show
that Automatic DST/Summer Time adjustment
has been canceled. The display returns to the
clock.
Notes
• The change timing of Automatic DST/Summer
Time adjustment employed by the unit (see
above) is subjected to variation by
circumstances and the law in each countryl
region. In such a case. cancel the Automatic
DST/Summer Time adjustment and set the
DST display manually as necessary. Customers
living in a countrylregion that does not use the
daylight saving time (summer time) must
cancel Automatic DST ISummer Time
adjustment before using the unit.
• To activate Automatic DST ISummer Time
adjustment again, press and hold CLOCK and
BRIGHTNESS/ TIME ZONE at the same time.
''Auto
-7
ON" appears in the display to show
that Automatic DST/Summer Time adjustment
has been activated. The display returns to the
dock.
l-
+:J
VOLUME
PULL OPEN
...
t:jJ
SLEEP
PRESET
~
o
MEMORY/
DISPLAY
+
AlARMnMESET
TUNING
o
o
MODE
The CD, iPod & iPhone
~II
and VOLUME
+
buttons have a tactile dot.
Setting
the clock
manually
1 Plug in the unit.
2 Press and hold CLOCK for at least 2
seconds.
The year starts to flash in the display.
3 Press ALARM TIME SET
+
or-
repeatedly to set the year.
4
Press CLOCK.
S
Repeat steps 3 and 4 to set the month,
the day, hour, and minute, and then press
CLOCK,
And the seconds start incrementing from zero.
Notes
• If you do not press a button for about 1 minute
while setting the dock, the dock setting will be
canceled.
• A calendar is installed in this unit. When the
date is set, a day of the week is automatically
displayed.
SUN
=
Sunday, MON
=
Monday,
TU E
=
Tuesday, WED
=
Wednesday,
THU
=
Thursday, FRI
=
Friday, SAT
=
Saturday
To display the year and date
Press SNOOZE/DATe/SLEEP OFF once for the
date, and within about 3 seconds press it again for
the year.
The display shows the date or year for about 3
seconds and then changes back to the current
time.
Setting the brightness
of the display
Three levels of brightness are available by pressing
BRIGHTNESS/ TIME ZONE.
Hir
(default) ......... Middle ......... Low
J
Setting the clock for
the first time
This unit is preset to the current EST (Eastern
Standard Time) at the factory, and is powered by
the back up battery. All you need to do the first
time is just plug it in and select your time zone.
1
Plug in the unit.
The current EST (Eastern Standard Time)
appears in the display.
2 Press and hold BRIGHTNESSI TIME
ZONE for at least 2 seconds.
Area number "2" flashes in the display.
3 Press ALARM TIME SET
+
or-
repeatedly to select the number as
follows:
Area number Time zone
Atlantic standard Time
Eastern standard Time
(default setting)
Pacific standard Time
Yukon standard Time
7 Hawaiian standard Time
Press BRIGHTNESS/ TIME ZONE to set.
Note
Though the clock is correctly set at the factory,
discrepancies may arise during transport or
storage. If necessary, set the clock to the correct
time by referring to "Setting the clock manually':
When daylight saving time
(summer time) begins
This model automatically adjusts for daylight
saving time (summer time).
"... is displayed from the beginning of daylight
saving time (summer time) and disappears at the
end of the daylight saving time (summer time)
automatically.
• Daylight saving time (summer time) begins at:
2:00 AM on the second Sunday of March.
• Standard time begins at: 2:00 AM on the first
Sunday of November.
Central standard Time
Mountain standard Time