Displaying A Computer Image - InFocus LP 120 User Manual

Displaying a computer image

Remove the lens cap.
Press the Power button on the top of the projector.
The LED flashes green and the Interactive Display illuminates and counts
down the time to image display. When the lamp comes on, the startup
screen is displayed and the LED is steady green. It can take a minute for the
image to achieve full brightness.
? No startup screen? Get help on page 15.
Turn on your computer.
The computer's image should appear on the projection screen. If it doesn't,
press the Source button on the projector's keypad.
Make sure your laptop's external video port is active.
Many laptops do not automatically turn on their external video port when a
projector is connected. Refer to your computer's documentation to learn the
activation commands specific for your computer. For example, some lap-
tops use a key combination of FN + F5 to turn the external display on and
off.
? No computer image? Try pressing the Auto Image
button on the keypad. Get help on page 16.
remove lens cap
press Power
turn on computer
source
activate laptop's external port
7