SonicWALL TZ 170 SP Getting Started Manual page 25

3. Right click on the Local Area Connection icon, and select Properties.
4. Highlight Internet Protocol (TCP/IP) and click Properties.
5. Select Obtain an IP address automatically.
6. Select Obtain DNS Server automatically.
7. Click OK, and then OK again to apply the settings.
Windows NT
1. From the Start list, highlight Settings and then select Control Panel.
2. Open Network.
3. Double-click TCP/IP in the TCP/IP Properties window.
4. Select Obtain an IP address automatically.
5. Click DNS at the top of the window.
6. Select Obtain DNS Server automatically.
7. Click OK, and then click OK again.
8. Restart the computer to apply the settings.
Windows 98
1. In the Start menu, select Settings and then select Control Panel.
2. Open Network.
3. Double-click TCP/IP in the TCP/IP Properties window.
4. Select Obtain IP Address automatically.
5. Click DNS Configuration.
6. Select Obtain DNS Server automatically.
7. Click OK, and then click OK again.
8. Restart the computer to apply the settings.
Static IP
If you did not enable the SonicWALL security appliance DHCP server, you must
configure each computer with a static IP address from your LAN or WLAN IP address
range. After the SonicWALL TZ 170 SP has restarted, follow the steps below for
configuring your network clients running any of the following Microsoft Windows
operating systems on your LAN/WLAN:
Windows XP
1. Open the Local Area Connection Properties window.
2. Double-click Internet Protocol (TCP/IP) to open the Internet Protocol (TCP/IP)
Properties window.
3. Select Use the following IP address and type an IP address from your LAN IP
range in the IP address field.
Page 24