Table of Contents
Advertisement
O O
P P
E E
R R
A A
T T
O O
P P
E E
R R
A A
T T
Input Menu
Table 5. Input Menu
Item
Automatic Adjustment at RGB Input: Select the EXECUTE with the
button. Horizontal position (H.POSIT), vertical position (V.POSIT), clock
phase (H.PHASE), and horizontal size (H.SIZE) are automatically adjusted.
Use with the window at maximum size in the application display.
Automatic Adjustment at Video Input: Select the EXECUTE with the
AUTO
button. A signal type appropriate for the input signal is selected
automatically when EXECUTE is selected automatically. Valid only when
AUTO is set for VIDEO on the menu.
• This operation requires approximately 10 seconds. It may not function correctly with
some input signals. Pressing the AUTO button in this case may correct this problem.
• This function is the same as for the AUTO function in Basic operation.
Displays RGB Input Frequency: Displays the horizontal and vertical sync
RGB
signal frequencies for RGB input.
• Valid only at RGB input.
Select Video Signal Type: Select the signal type with the
buttons. Select NTSC, PAL, SECAM, NTSC4.43, M-PAL, or N-PAL as
appropriate for the input signal. The selection of AUTO enables and
executes the function AUTO (Automatic Adjustment at Video Input), except
for the N-PAL input.
• Use this function when the image becomes unstable (eg. the image becomes
VIDEO
irregular, or lacks color) at VIDEO/S-VIDEO input.
• Automatic Adjustment requires approximately ten seconds. It may not function
correctly with some input signals. Pressing the AUTO button in this case may correct
this problem except for the N-PAL input.
• For the COMPONENT VIDEO input, this function is not effective and the signal type
is distinguished automatically. Refer to the item HDTV of the OPT. Menu for the
signal of HDTV.
Set/Clear Noise Reduction Mode: Select the TURN ON / TURN OFF with
VIDEO NR
the
and the noise on screen of the video input will be reduced.
Select Progressive Mode: Select the mode suitable for the input signal
with the
Progressive
the interlaced video signal into the progressive signal. The CINEMA mode is
adptable for 2-3 Pull-Down system.
• Use this function to raise resolution, at the interlaced video input except HDTV
signals.
Set/Clear Black Enhancement Mode: Select the TURN ON / TURN OFF
with the
BLACK
enhancement mode is active and the contrast ratio of the screen for the
video input will be raised by making black level darker.
I I
O O
N N
S S
( (
c c
I I
O O
N N
S S
( (
c c
/
button. When the TURN ON is selected, the NR mode is active
and
buttons. The TV mode and the CINEMA mode convert
/
button. When the TURN ON is selected, the black
o o
n n
t t
i i
n n
u u
e e
o o
n n
t t
i i
n n
u u
e e
Description
d d
) )
d d
) )
SETUP
INPUT
IMAGE
AUTO
EXECUTE
CANCEL
RGB
VIDEO
VIDEO NR
Progressive
BLACK
and
ENGLISH-13
ENGLISH-13
OPT.
Advertisement
Table of Contents
