Nemic-Lambda ZUP6-33 User Manual page 9

SAFETY INSTRUCTIONS
OUTPUT TERMINALS COVER
Hazardous voltages may exist at the output terminals of the 60V models.
Attach the terminals cover, supplied with the unit, to the chassis after
After connection of the load wires ( refer to par. 3-7 ), attach the plastic cover to the rear panel of the
power supply,using two self tapping screws supplied with the unit. Refer to Fig. 1-1 for details.
REAR PANEL
Fig. 1-1: Terminals cover assembly
WARNING
connecting the load wires as described below.
PLASTIC COVER
4
LOAD WIRES