Operating Instructions - Panasonic CW-C51LE Service Manual

Window type
Table of Contents

Advertisement

Operating Instructions

1.
Power Suplly
Set the main control switch to the OFF position,
and confirm that the power supply cord is
connected to a proper AC outlet.
2.
Main Control Switch
Set either LOW COOL or
HIGH COOL, as required. (
Fan setting operates the fan
only ).
Caution: If the timer is turned of ,wait at least 3
minutes before restarting the operation ( the
timer set to ON or setting hour).
3.
Thermostat Control Switch
Set
the
thermostat
control at the desired
setting. (ussually at 6 ~ 7
is recommended setting
position). If the room
temperature
is
satisfactory after a
reasonable amount of
time, turn the control
clockwise to cool the
room more, or anti
clockwise to cool the
room less.
When the termostat control is set to 10, moisture may
freeze onto the coils and prevent effective cooling. If
this happens, turn the main control switch to FAN,
and the thermostat control switch anti clockwise. This
will quickly defrost the cooling coil and resume
normal cooling.
not
4.
Vertical Airflow Direction Vane
(Airflow direction adjusment Up-and-Down)
The vertical airflow
direction vane may
be positioned using
tabs to deflect the air
upward, downward,
or straight on.
5.
Horizontal Airflow Direction Vane
(Airflow direction adjusment Side-to-Side)
The
horizontal
airflow
direction
vane
may
adjusted by lever to
deflect the air side to
side ( left,right, or
straight).
Recommendation
Use the air conditioner under the following conditions as below:
Operating temperature range.
Maximum
Temperature
Minimum
Temperature
DBT : Dry Bulb Temperature.
WBT : Wet Bulb Temperature.
Humidity does not exceed 90 %.
Continuous operation at over 90 % humidity
may create condensation and waterdrops on
the intake and outlet vents.
- 3 -
Vertical Airflow Direction Vane
be
(Unit in o C)
Indoor
Outdoor
DBT
WBT
DBT
32
23
43
21
15
21
WBT
26
15

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents