Sony Cyber-shot DSC-HX400 Instruction Manual page 24

Peaking Color
Exposure Set. Guide
Zoom Setting
FINDER/MONITOR
Write Date
Function Menu Set.
Custom Key Settings
MOVIE Button
(Wireless)
Send to Smartphone
Send to Computer
View on TV
One-touch(NFC)
Airplane Mode
WPS Push
Access Point Set.
Edit Device Name
Disp MAC Address
SSID/PW Reset
Reset Network Set.
GB
24
Sets the color used for the peaking function.
Sets the guide displayed when exposure settings are
changed in the shooting screen.
Sets whether to use the Clear Image Zoom and Digital
Zoom when zooming.
Sets the method for switching between the viewfinder
and screen.
Sets whether to record a shooting date on the still
image.
Customizes the functions displayed when the Fn
(Function) button is pressed.
Assigns a desired function to the button.
Sets whether to always activate the MOVIE button.
Transfers images to display on a smartphone.
Backs up images by transferring them to a computer
connected to a network.
You can view images on a network-enabled TV.
Assigns an application to One-touch (NFC). You can
call up the application when shooting by touching an
NFC-enabled smartphone to the camera.
You can set this device not to perform wireless
communications and GPS functions.
You can register the access point to the camera easily
by pushing the WPS button.
You can register your access point manually.
You can change the device name under Wi-Fi Direct,
etc.
Displays the MAC address of the camera.
Resets the SSID and password for the smartphone
connection.
Resets all network settings.