Frequently Asked Questions - InFocus LiteShow network adapter User Manual

26

Frequently Asked Questions

The following are questions that you may have about the LiteShow system and its individual parts.
Q: The Scan button is not enabled, and the LiteShow Manager window shows "Basic feature set". What should I
do?
A. What this means is that your current wireless 802.11b driver supports the LiteShow Basic Features, but does not
support LiteShow's Advanced Features.
Network Switching
One of the features of LiteShow is the ability to switch from one network to another and to find available projectors on
other networks via the LiteShow Manager's Scan button. When you look at the LiteShow Manager and see two
LiteShow-enabled projectors, one is, for example, on the "LiteShow" WLAN (or network) and the other is, for example,
on the "myCorporateNetwork" WLAN. You start projecting through the projector on the "LiteShow" WLAN. With a
wireless 802.11b driver that supports network switching, you can stop projecting through the "LiteShow" WLAN and
switch to the projector on the "myCorporateNetwork" WLAN. This is known as the Advanced Feature set.
With basic network switching the Scan button is not operational. This is known as the Basic Feature set.
However, when the Advanced Feature set is not supported, you have two options:
• Update your wireless network driver
or
• Set up network profiles
InFocus LiteShow User's Guide