Advertisement
< Control LCD & PDP through Serial Port >
1. How to connect external equipment
- Connect the serial port of external equipment to the RS-232C jack of the monitor
back panel.
- RS-232C cables not included with the Monitor.
- The remote control and LCD&PDP front panel buttons (except main power) doesn't
operate when controlling LCD&PDP set by PC.
< PC >
- Type of connector : D-Sub 9-Pin
No.
1
No conection
2
RXD (Receive data)
3
TXD (Transmit data)
4
No conection
5
6
No conection
7
No conection
8
No conection
9
No conection
[NOTE]
* Use a crossed (reverse) cable.
Com2
Com1
RS-232C Cable
Pin Name
GND
RS-232C
DVI INPUT
AUDIO INPUT
RGB PC INPUT
< PDP >
female to female
- Cable Side (female) -
Harsper R&D
2005. 4. 20.
Advertisement
