2. Setting the user number
Press the "Set "button. The number "P-01" will appear and blink. Use the Up/Down
button to select a user number (P-01 to P-4). Press SET to confirm.
1. Operate the scale on a secure flat floor. Tap the scale to turn it on, and wait till
"0.0" appears. Press the "User" button repeatedly until your user number shows on
the display.
2. Stored data for your user number appears (User number, Height, and Age) then
the scale displays "0.0".
3. Setting the height
Next, the height indicator "HT" and inch or cm symbol light up (if switch is set to lb,
default is height in inches; if switch is set to KG, default is height in cm). Press the
up or down arrows to adjust the height. Pressing and holding either the up or the
down arrow will advance numbers quickly. Press SET to accept the height. Scale
3. Step on the scale barefoot with your feet aligned on the electrodes (metal strips)
enters the age setting mode.
on both the sides of platform. Note: you must be barefoot in order for the scale to
read your body analysis measurements.
4. Your current weight will be displayed for a few seconds.
4. Setting the age
"AGE" appears and the default age 25 flashes. Press the up or down arrows to ad-
just the age and press SET to confirm. The scale enters the gender setting mode.
5. Then the display will show "bF %" followed by your body fat percentage.
5. Setting the gender
6. Next, "H2O" shows on the display, followed by your body water percentage.
A gender icon flashes. Press the up or down arrows to choose between male and
female gender. Press the set key to confirm.
7. Then, "bone" shows on the display, followed by your bone mass value.
6. Display and store data
• Once the gender is set, data storage is complete.
• User number, height and age each display for a few seconds.
7. The scale will turn off automatically.
Body Analysis:
8. Finally, "b" shows on the display, followed by your BMI (Body Mass Index)
9. Display scrolls through your body fat, body wate, bone mass and BMI values
again and then scale turns off.
NOTES
If you step on the scale before "0.0" appears, the scale will not function
properly.
Scale will show "Err" if there is improper foot contact in the body analysis
mode, for instance, when you stand on the scale with socks or shoes on.
Hard or dry skin can prevent you making proper contact with electrodes on
the surface of the scale. Try applying a small amount of moisturizer to your
feet before using the scale.
LIMITED TEN YEAR WARRANTY
Conair will repair or replace, at our option, your appliance free of charge for 120
months from the date of purchase if the appliance is defective in workmanship
or materials.
To obtain service under this warranty, return the defective product to the service
center listed below that is nearest you, together with your sales slip and $5.00 for
postage and handling. California residents need only provide proof of purchase
and should call 1-800-3-CONAIR for shipping instructions. In the absence of a
receipt, the warranty period shall be 120 months from the date of manufacture.
ANY IMPLIED WARRANTIES, OBLIGATIONS, OR LIABILITIES, INCLUDING BUT NOT
LIMITED TO THE IMPLIED WARRANTY OF MERCHANT ABILI TY AND FITNESS FOR
A PARTICULAR PURPOSE, SHALL BE LIMITED IN DURATION TO THE 120-MONTH
Some states do not allow limitations on how
DURATION OF THIS WARRANTY.
long an implied warranty lasts, so the above limitations may not apply to you.
IN NO EVENT SHALL CONAIR BE LIABLE FOR ANY SPECIAL, INCIDENTAL, OR
CONSEQUENTIAL DAMAGES FOR BREACH OF THIS OR ANY OTHER WARRANTY,
Some states do not allow the exclusion
EXPRESS OR IMPLIED, WHATSOEVER.
or limitation of special, incidental, or consequential damages, so the above
limitation may not apply to you. This warranty gives you specific legal rights,
and you may also have other rights which vary from state to state.
Service Centers
Conair Corporation
Service Department
150 Milford Road
East Windsor, NJ 08520
©2010 Conair Corporation. East Windsor, NJ 08520, Glendale, AZ 85307. Made in China.
©2010 Weight Watchers International Inc. All rights reserved. Weight Watchers is the
registered trademark of Weight Watchers International Inc. and used under license.
Scales by
™
Instructions
for use of
Weight Watchers
bathroom scale
Congratulations! By purchasing this Weight Watchers Scale, you've made
Conair Corporation
the first step toward taking control of your weight. To get the greatest benefit
Service Department
1-800-326-6247
7475 N. Glen Harbor Blvd.
from your purchase, please read this entire brochure before using your scale.
www.conair.com
Glendale, AZ 85307
Models #WW28
IB-10186
10AD115510
Need help?
Do you have a question about the WW28 and is the answer not in the manual?
Questions and answers