Problem Disc Message; Getting Started; Power Management - Coby DVD-218 User Manual

GETTING STARTED

Problem disc messages
The following message will display on screen when there is a format problem with the loaded disc:
WRONG REGIONAL DISC
Region code of the disc is not matching to the player`s region code (region 1 to region 6).
WRONG PASSWORD
The rating level of the disc is higher then the rating level setting of the player.
The player will not play the disc.
WRONG DISC
The player is equipped with automatic disc quality detection software. When the played
detects a problem disc or a damaged disc, the player may keep playing the disc at lower
quality or stop playing, depending on the damaged level of the disc.
Production qualities of DVD discs vary, some discs might deviate from the industrial
standard. Some incorrectly formatted discs may playback on the player. However,
the playback and operational quality of those disc may be substandard.
DTS DISC
For DTS digital audio stream only
No analog audio output.
Make sure you select Dolby 5.1 or 2 channel down mix instead of DTS setting .
Connect the digital audio output (coaxial) to a digital amplifier, in order to enjoy DTS audio
system.

Power management

If the player will not be in use for a long time, unplug the player for personal safety.
This player does not have a DTS decoder bulti-in. It may
result in no analog audio output if you select DTS sound
output.
9