Table of Contents
Advertisement
PNCH-1
Diagram 2A: 2 MACHINE SYSTEM: 2 VTRS WHERE THE VTRS ARE BEING USED FOR BOTH
DOWNLOAD AND RECORDING
In this configuration, the One-2-Punch is
controlling 2 VTRs in total, where one or
both are recorders and will be used to
record the edited material from the NLE. As
shown, simply connect the VTR RS422
cables from each VTR to each designated
port on the source side. Connect the NLE to
the output 9 pin located directly below the
source 9 pins. Place the Control Switch in
the source position (LEFT) and leave it
there. There is no need to connect any
RS422 cables to the Record side.
REC-1
REC-2
OUT
One-2-Punch Specialized Router For
Non-Linear Editing Applications
Source/Record
VTR2
Source/Record
VTR1
4 High Street • Saugerties, NY 12477
A Division of Tower Products, Inc.
SOURCE-1
SOURCE-2
IN
NLE
Advertisement
Table of Contents
