Table of Contents
Advertisement
Phone lock on
If the phone lock is on, the message Phone locked
appears each time you turn on the phone. You have
to enter your code followed by
Automatic
If the phone lock is set to automatic, you do not need
to enter your phone lock code until a different SIM
card is inserted in the phone.
• To edit your phone lock code, scroll to Settings, Locks,
Phone lock, Change code.
Note: It is important that you remember your new
code. If you should forget it, you have to hand in
your phone to your local Sony Ericsson retailer.
To set the phone lock
1. Scroll to Settings, Locks, Phone lock, Protection.
2. Select an alternative.
3. Enter the phone lock code and press
This is the Internet version of the user's guide. © Print only for private use.
to use your phone.
Yes
.
Ok
Troubleshooting
This chapter lists some problems that you might
encounter while using your phone. Some problems
require that you call your service provider, but you
can easily correct most of the problems yourself.
The phone cannot be switched on
Hand-held phone
Recharge or replace the battery. See "SIM card and
battery information" on page 5.
No indication of charging
When you start charging a battery that is empty or a
battery that has not been used for a long time, it may
take up to 30 minutes before the battery icon appears
in the display.
Menu language
If the display shows a language that you do not
understand, you can always choose Automatic
(determined by your SIM card) by pressing
8888
in standby. You can always choose
English by pressing
0000
in standby.
Troubleshooting
77
Advertisement
Table of Contents
