Page 2
INTRODUCTION Thank you for choosing Sienna for your household cleaning needs. Our steam mop products use the active power of steam without the use of chemicals; making it a green product that is safe for the ecosystem. You have begun the first step into transforming your house into a green, environmentally safe home.
SAFETY GUIDELINES The Sienna Vortex (SSM-0418) Steam Mop is for indoor domestic floor use only. Any commercial use will void warranty. The steamer should not be used upside down or vertically. It is designed for sanitizing and cleaning an array of floor surfaces such as carpet, ceramic tile, sealed hardwood, marble, sealed laminate, stone, and vinyl floors.
KEY FEATURES HANDLE TRIGGER QUICK RELEASE CORD WRAP CARRYING HANDLE LOWER CORD WRAP CLOTH PAD POWER CORD WATER TANK FILTER STEAMER BODY MOP HEAD CARPET GLIDER...
Page 5
1) Attach steamer head to body of the unit. 2) Secure steamer head with screw provided until fully tightened (use Philips Screwdriver.) 3) Insert handle into body of unit. Secure handle with screw provided until fully tightened. 4) Set cloth pad on the floor. Be sure to loosen drawstring on the pad so that the steamer head will fit properly inside the pad.
Page 6
NOTE: It is recommended that another high wattage appliance is not operated on the same circuit to avoid a circuit overload. CAUTION: Upon initial use, please hold trigger to allow the water to flow thru the system for approximately 30 seconds to prime the unit. WARNING: ON SURFACES THAT HAVE BEEN TREATED WITH WAX, THE WAX MAY BE REMOVED BY THE HEAT AND STEAM ACTION.
CLEANING AND MAINTENANCE CAUTION: Prior to cleaning or maintaining your steam mop, isolate the unit by removing the cord from the power socket and avoid immersing the unit in water. 1) The microfiber cloth pads can be machine washed in hot water and tumble dry. Do not use bleach or fabric softener.
TROUBLESHOOTING CAUTION: Prior to cleaning or maintaining your steam mop, isolate the unit by removing the cord from the power socket. PROBLEM SOLUTION Ÿ Ensure steamer power cord is correctly plugged into a LED is not on 120V AC power outlet only. Ÿ...
ONE YEAR LIMITED WARRANTY Our Sienna product warranty extends only to the original customer purchaser of the product. It is warranted by the manufacturer to be free from all defects in materials or workmanship for a period of one year from the date of original purchase.
Page 10
Customer Service will give you further instructions for returning a defective product for repair or replacement. When returning a defective product, carefully pack the item to avoid damage in shipping, the manufacturer cannot assume responsibility for loss or damage during incoming shipment. We recommend that you insure the package, as damage in shipping including the shipping cost is not covered under our warranty.
Need help?
Do you have a question about the Vortex SSM-0418 and is the answer not in the manual?
Questions and answers