Toshiba 37HLX95 Service Manual page 11

10. STATUS CHECK MODE
1) Press "9" button thrice on Remote Control during display of adjustment menu in the service mode. The status of this
model will begin to check.
2) During Status Check, the following displays are shown.
MAIN :
Main source information :
Display RF position number (0 - 99) on the main screen, or Input Source (ANT1/2/HDMI etc.)
MAIN FORMAT :
Display Video and PC format information
MAIN PLL :
Main PLL information : Display five numbers of 2 byte data.
SCREEN SIZE :
Display the screen size as follows.
Theater Wide 1
Theater Wide 2
Theater Wide 3
FULL
NATURAL
OTHER STATUS :
Other status information : Display three numbers of 2 byte data.
ANT1 CABLE 12
480i
06 OF B0 CE 02
NATURAL
0000 0000 0000
- 11 -