Sony RDR-HXD870 Operating Instructions Manual page 21

A Digital audio input jack
If your audio component has a Dolby
*2
Digital, DTS , or MPEG audio decoder and
a digital input jack, use this connection. You
can enjoy Dolby Digital (5.1ch), DTS
(5.1ch), and MPEG audio (5.1ch) surround
effects.
If you connect a Sony audio component that
is compatible with the HDMI control
function, refer to the operating instructions
supplied with the audio component.
B Audio L/R (left/right) input jacks
This connection will use your TV's or audio
component's two speakers for sound.
C Audio L/R (left/right) input jacks
This connection will use your TV's or audio
component's two speakers for sound.
To connect the EURO AV adapter, see
page 18.
z Hint
For correct speaker location, see the operating
instructions supplied with the connected
components.
b
Notes
*1
• With connection C, set the selector on the EURO
AV adapter to the "OUTPUT" position to listen to
sound.
• Do not connect your TV's audio output jacks to
the LINE IN (R-AUDIO-L) jacks at the same
time. This will cause unwanted noise to come
from your TV's speakers.
• With connections B and C, do not connect the
LINE IN (R-AUDIO-L) and LINE 2 OUT (R-
AUDIO-L) jacks to your TV's audio output jacks
at the same time. This will cause unwanted noise
to come from your TV's speakers.
• With connection A, after you have completed the
connection, make the appropriate settings in the
"Audio Out" setup (page 122). Otherwise, no
sound or a loud noise will come from your
speakers.
• When you connect the recorder to an audio
component using an HDMI cord, you will need to
do one of the following:
– Connect the audio component to the TV with
the HDMI cord, or
– Connect the recorder to the TV with a video
cord other than HDMI cord (component video
cord, S-video cord, or audio/video cord).
*1
*2
"DTS" and "DTS Digital Out" are registered
trademarks of DTS, Inc.
21