Sony RDR-HXD870 Operating Instructions Manual page 140

TV Pause does not work.
, You are recording to the HDD or the HDD
is full.
, Set "TV Pause" to "Recorder's Tuner" in
the "Options 2" setup (page 135).
, You cannot pause a TV broadcast that is
tuned in by the TV's tuner.
Recording/Timer recording/
Editing
The programme position cannot be
changed from the programme position you
are recording.
, Set the TV's input source to "TV."
Recording does not start immediately
after you press z REC.
, Operate the recorder only after "LOAD,"
"FORMAT," or "INFO WRITE"
disappears from the front panel display.
Nothing was recorded even though you set
the timer setting correctly.
, There was a power failure during recording.
, The recorder's internal clock stopped due to
a power failure that lasted for more than 1
hour. Reset the clock (page 112).
, The channel was disabled after the timer
recording was set. See "Manual CH
Setting" on page 116.
, Disconnect the AC power cord (mains lead)
from the mains, and connect it again.
, The programme contains copy protection
signals that restrict copying.
, Another timer setting overlapped the timer
setting (page 50, 60).
, There is no DVD inside the recorder.
, There is not enough disc space for the
recording.
, The recorder was in the process of dubbing.
, A scrambled channel is selected.
140
Recording does not stop immediately
after you press x REC STOP.
, It will take a few seconds for the recorder to
input disc data before recording can stop.
On-screen instructions may appear after
pressing x REC STOP. In this case, follow
the on-screen instructions.
Recording does not stop after you press
x.
, Press x REC STOP.
Timer recording is not complete or did not
start from the beginning.
, There was a power failure during recording.
If the power recovers when there is a timer
recording, the recorder resumes recording.
Should the power failure continue for more
than 1 hour, reset the clock (page 112).
, Another timer setting overlapped the timer
setting (page 50, 60).
, Disc space was not sufficient.
Contents previously recorded were
erased.
, Data that is not playable on this recorder but
was recorded on a DVD with a PC will be
erased from the disc when the disc is
inserted.
Dubbing
You dubbed a title, but the title did not
appear in the HDD Title List.
, The title contained a copy protection signal,
so it was moved (page 82).
"High-Speed" dubbing is not possible.
, The title cannot be dubbed at high speed
(page 83). Even if A-B erasure is performed
so that a title does not contain mixed picture
sizes, it is still treated as a title with mixed
picture sizes.
HDD/DVD Dubbing is not possible.
, The title cannot be dubbed (page 82).