Download
Share
Print this page
  1. Manuals
  2. Brands
  3. MLC Manuals
  4. Switch
  5. LS12/2
  6. Instruction manual

MLC LS12/2 Instruction Manual

Midi loop/ switch
Hide thumbs

Advertisement

Quick Links

MIDI LOOP & SWITCH LS12/2

Instruction Manual 1

MIDI LOOP/ SWITCH LS12/2
Instruction Manual
MARK L Custom Guitar Electronics 1

Advertisement

loading
Need help?

Need help?

Do you have a question about the LS12/2 and is the answer not in the manual?

Questions and answers

Related Manuals for MLC LS12/2

Summary of Contents for MLC LS12/2

  • Page 1: Instruction Manual

    MIDI LOOP & SWITCH LS12/2 Instruction Manual 1 MIDI LOOP/ SWITCH LS12/2 Instruction Manual MARK L Custom Guitar Electronics 1...
  • Page 2 MIDI LOOP & SWITCH LS12/2 Instruction Manual 2 Contents :  Introduction  Warranty  1 – Front Panel  2 – Rear Panel  3 - MIDI  4 – Configuration and effects plug-in MARK L Custom Guitar Electronics 2...

  • Page 3: Mark L Custom Guitar Electronics

    LS12/2 is controlled by MIDI CC (Control Change) and MIDI PC ( Program Change ) commands over 16 MIDI channels. LS12/2 is compatible with any type of MIDI controller capable of sending CC or PC midi commands, but to ensure proper operation and maximum effectiveness we recommend using MLC MARK L controllers.
  • Page 4 MIDI THRU OUT, a bypass, thanks to which we can hook-up an additional midi device which we want to control with the same device as the LS12/2 MIDI IN has built-in power supply for all MARK L controllers, you need not plug in every controller separately.
  • Page 5 MIDI LOOP & SWITCH LS12/2 Instruction Manual 5 Warranty 1. The Warranty is limited to production defects and/or faulty components. 2. The Warranty expires 24 months after the date of purchase. 3. The Warranty does not cover the following: ...

  • Page 6: Front Panel

    MIDI LOOP & SWITCH LS12/2 Instruction Manual 6 1. Front Panel The front panel consists of 15 LED diodes informing which loop (L1-L12) or which switch (S1-S2) is on, a MIDI light which informs if the device is receiving MIDI signals and 16 buttons.

  • Page 7: Rear Panel

    MIDI LOOP & SWITCH LS12/2 Instruction Manual 7 2.Rear Panel The rear panel consists of 6,3 mm ‘jack’ receptacles used for connecting effects, audio signals and control the amplifier and other devices - LINK OUT -feed thru on front panel output...
  • Page 8 MIDI LOOP & SWITCH LS12/2 Instruction Manual 8 MARK L Custom Guitar Electronics 8...
  • Page 9 MIDI LOOP & SWITCH LS12/2 Instruction Manual 9 3.Midi MIDI CONNECTION and Phantom Power for FX25/FX25ACE MIDI INPUT signal Pin 1 - NC Pin 2 - NC Pin 3 - NC Pin 4 - MIDI (+) Pin 5 - MIDI (- )

  • Page 10: Instruction Manual 10

    To save a setting to a MIDI program change: Select a MIDI program number with your MIDI footswitch or controller. Manually select the desired state of each Audio Loop using the MLC LS10/6’s front panel buttons. Hold down the STORE button until the LEDs flash.
  • Page 11 MIDI LOOP & SWITCH LS12/2 Instruction Manual 11 ON/OFF normal mono mode ON Value -127 , OFF Value -0 L1 = Midi Control Change # CC-11 L2 = Midi Control Change # CC-12 L3 = Midi Control Change # CC-13...

  • Page 12: Midi Loop & Switch

    MIDI LOOP & SWITCH LS12/2 Instruction Manual 12 4. Configuration effects plug-in. MARK L Custom Guitar Electronics 12...
  • Page 13 MIDI LOOP & SWITCH LS12/2 Instruction Manual 13 MARK L Custom Guitar Electronics 13...