Screw (Type A); Screw (Type B); Casement Window; Use Of Extension Cords - LG LC6000 Owner's Manual

Casement Window Installation
1. Installation procedure is the same as that described in steps 1 through 11 and step 13 of the
Horizontal Sliding Window installation.
2. If the window opening is wider than 15-3/4 inches you will need to install a filler panel. Make this
panel from 3/4 inch thick wood and run it the full length of the window.
Attach it securely to the window frame and paint it to protect it from the weather.
3. Since styles and sizes of casement windows vary widely, it is advisable to have the air conditioner
installed by someone skilled in this type of installation.
Installing the Power cord
You can choose between the two methods below according to your preference and window sill
shape.
Using slit "A"
• Fasten the stopper using Type A screw, and
pass the power cord through slit "A".

Screw (Type A)

Power cord
Electrical Data
Line Cord Plug
Do not under any
circumstances cut
or remove the
grounding prong
from the plug.
Power supply cord with
3-prong grounding plug

Use of extension cords

Because of potential safety hazards, we strongly discourage the use of an extension cord. However,
if you wish to use an extension cord, use a CSA certified/UL-listed 3-wire (grounding) extension
cord, rated 15A, 125V.
• Fasten the stopper using left screw hole, and
rotate properly to pass the power cord through
slit "B".
Screw (Type A)
A Power cord
Use Wall Receptacle
Standard 125V, 3-wire grounding
receptacle rated 15A, 125V AC
Installation
Using slit "B"
Power Supply
Use 15 AMP, time
delay fuse or circuit
breaker.
Owner's Manual 15
B