Final System Balance - Infinity 1.2s Owner's Manual

Infinity systems intermezzo series loudspeakers model intermezzo 1.2s owner's guide

Hide thumbs Also See for 1.2s:

Service manual (42 pages)

Table Of Contents

Table of Contents

Enlarged version

You must use the R.A.B.O.S. key to adjust these controls. Always

adjust both subwoofers together. Using the adjustment key, adjust

the controls as indicated by the Measurement Template. Each

value shown in the table is represented by detents in the

R.A.B.O.S. controls. Simply count the number of detents

necessary, indicated by the results of your R.A.B.O.S.Test.

Intermezzo 1.2s R.A.B.O.S. Controls

After performing these adjustments, you may skip forward to

the "Final System Balance" section. It is recommended that you

perform a second measurement to confirm that the settings

are correct.

If you are going to retest the system after EQ adjustments,

repeat the "Setting the Subwoofer Test Level" section on p. 11.

Retesting the system will go much faster if you use

Tracks 27–50.These tracks contain all the same test tones you

just used. However, each tone plays for only a few seconds and

there is no frequency announcement. If you are uncomfortable

operating at this pace, you may, of course, perform measure-

ments with the original test tracks.

Your first interpretation of the data and choice of settings may

not be optimum.You can repeat the test-adjust-test cycle as often

as needed to get the desired results.To do this, return to page

11,"Setting the Subwoofer Test Level." You may prefer to retest

using the same template. Doing so makes it easy to evaluate

the improvement.

When you are satisfied with the results, go to "Final System

Balance."