3. DVD player audio/video source unit connected to the following DVLX4xCx rear panel inputs:
a. VIDEO 2 video input and AUDIO L/MONO and AUDIO R audio inputs.
b. S-VIDEO 2 video inputs.
4. DVD player audio/video source unit connected to the following DVLX4xCx rear panel inputs:
a. COMPONENT 1 (YPbPr) video input and COMP.1-L and COMP.1-R audio inputs.
b. DVI video input and DVI-L and DVI-R audio inputs.
5. DVD player audio/video source unit connected to the following DVLX4xCx rear panel inputs:
a. COMPONENT 2 (YCbCr) video input and COMP.2-L and COMP.2-R audio inputs.
6. DVD player audio/video source unit connected through RF modulators to the following
DVLX4xCx rear panel inputs:
a. The DVD player's S-Video output to the RF modulator; the RF modulator's output to the ANT
A input with a coaxial cable.
b. The DVD player's Video output to the RF modulator; the RF modulator's output to the ANT B
input with a coaxial cable.
7. PC audio/video source unit displaying the VGA test pattern shown in Figure 5.
Use the VGA cable to connect this PC to the PC input of the DVLX4xCx.
8. Barcode reader to enter the DVLX4xCx Serial Number (S/N) into the PC test controller.
9. Disconnect switch on the 110 VAC powering the DVLX4xCx.
The DVD players in the test environment are not exclusive to any specific manufacturer's model.
However, one example of a DVD player suitable for the test environment is the Samsung Model DVD-
HD841/XAA.
service_manual_i
10 December 2004
Figure 5: VGA Test Pattern
DVLX Confidential
Rear Projection TV Service Manual
- 9 -