Using The Drawing Function - Hitachi CP-X8160 User Manual

Presentation tools
Drawing function (continued)

Using the Drawing function

Touching or clicking the connected Hitachi Pen tablet / USB mouse starts up
drawing mode. A tool bar like the fi gure below is displayed on the projector screen
while in the drawing mode. Touching/clicking an icon on the tool bar enables
the following functions. Touching anywhere on the tool bar except an icon and
dragging moves the toobar.
NOTE
• Images may be copyrighted, in which case, permission from the
copyright holder is necessary for use, in accordance with the copyright act and
other applicable laws.
• The drawing function does not support drawing on images from the LAN
port or the USB TYPE B port of the projector. If you operate the Hitachi Pen
tablet / USB mouse while these images are displayed, the input source may
automatically switch to USB TYPE A port.
1. Pen
2. Pen color
3. Pen size
(continued on next page)
104
1 2 3
Selects the pen function.
The cursor turns into a Pencil
the specifi ed pen color and size.
The cursor turns into a Laser Pointer
draw a line.
Selects the Color of the line drawn by the Pencil.
Specifi es Black.
Specifi es Red.
Specifi es Blue.
Selects the Thickness of the line drawn by the Pencil.
Specifi es 1-dot.
Specifi es 3-dot.
Specifi es 5-dot.
4 5 6 7 8 9
; dragging it draws a line of
. Dragging it does not