Table of Contents
Advertisement
Changing Training Computer Battery
Open the battery cover with a coin by turning it from CLOSE
1.
to OPEN (A1).
2.
Remove the battery cover and lift the battery out carefully
with a suitable sized small rigid stick or bar, such as a
toothpick. A non-metal tool is preferable. Be careful not to
damage the metal sound element (*) or the grooves. (A2)
Insert a new battery with the positive (+) side outwards.
3.
Replace the old sealing ring with a new one (if available),
fitting it snugly in the cover groove to ensure water resistance.
4.
Put the cover back on and turn clockwise to CLOSE.
Changing Heart Rate Sensor Battery
1.
Lever the battery cover open by using the clip on the strap.
(B1)
2.
Remove the old battery from the battery cover with a suitable
sized small ridgid stick or bar, such as a toothpick. A
non-metal tool is preferable. Be careful not to damage the
battery cover.
3.
Insert the battery inside the cover with the negative (-) side
outwards. Make sure the sealing ring is in the groove to ensure
water resistance.
4.
Align the ledge on the battery cover with the slot on the
connector and press the battery cover back into place. You
should hear a snap.
Important Information
ENGLISH
17
Advertisement
Table of Contents
