Infinity GPS-MIC-1 User Manual page 8

5.1 Preparing your Unit for use
Insert the battery pack in the rear of the unit.
To do so,
1. Open the battery cover of the handheld unit by using a coin or large flat head
screwdriver; turn the screw counter clockwise to open the cover.
2. Install the battery, with the label right side up with battery connections found on the
upper left had corner, mating with the pins of the GPS unit.
3. Re-install the battery compartment's door.
4. Use the two screws supplied and attach the belt/shoulder clip to the rear case.
8