Table of Contents
Advertisement
HP 56K V90 PCI Internal Modem
Important Safety Information
Do not attempt to connect this product to the phone line during a lightning storm.
Never install telephone jacks in wet locations unless the telephone line has been
disconnected at the network interface. Never touch uninsulated telephone wires or
terminals unless the telephone line has been disconnected at the network interface.
Use caution when installing or modifying telephone lines. Avoid using a telephone
(other than a cordless type) during an lightning storm. There may be a risk from
lightning.
Do not use the telephone to report a gas leak in the vicinity of the leak. Never touch
or remove the Communications board without first removing the connection to the
telephone network.
Use minimum No 26 AWG wire for telephone cable.
Supported Platforms
To find out which HP PCs support the HP 56K V90 PCI Internal modem, go
to: www.hp.com/go/pcaccessories .
Installing Your Modem Card
Disconnect the PC power cord and remove the cover.
1
Select an available PCI slot and remove its cover plate.
2
3
Insert the card into the slot as described in your PC documentation.
4
Replace the cover and reconnect the power source.
1
Advertisement
Table of Contents
