Polaris 2010 Vegas Owner's Manual page 89

Rear Wheel Alignment
WARNING! A skewed rear axle can damage the drive belt, causing belt failure and loss of control of the motorcycle.
1. Elevate the rear of the motorcycle until the rear wheel is off of the ground. Use an appropriate motorcycle lift or a
block of wood or steel placed securely under the frame.
2. Place the transmission in neutral.
3. The axle adjusters or plates are stamped with marks that are used as a reference to ensure proper wheel alignment.
Inspect the position of the alignment marks on each side in relation to the mark stamped on the swingarm. The
marks should be in the same position on both left and right sides of the wheel.
Axle
Nut
Stamped Marks
Swingarm
Mark
Maintenance
Swingarm
Mark
Axle
Nut
85