Clean and Protect the Motorcycle
To prepare the motorcycle for storage, begin by cleaning it as outlined beginning on. Wax painted surfaces and polish
chromed and other metal surfaces. Apply protectant to exposed rubber, vinyl, and plastic parts.
Do not apply rubber protectant to the tire tread surfaces.
Using a mixture of fuel and the recommended amount of VICTORY Premium Carbon Clean Plus or other gasoline
stabilizer, fill the fuel tank to a level just below the bottom of the fuel filler insert.
Ride the motorcycle or start and run the engine for 15 minutes in a well ventilated area to pass the stabilized fuel
through entire fuel-injection system.
Change the engine oil. See page 75. Carbon deposits and combustion acids, normally suspended in the engine oil
when in service, settle on internal engine components during storage. Settled deposits can cause engine damage or