Inspect all brake hoses and connections for dampness or stains from
leaking or dried fluid. Tighten any leaking connections and replace com-
ponents as necessary. Torque fasteners to specification. See the VIC-
TORY Service Manual or your authorized VICTORY dealer.
Inspect front and rear brake pad thickness. Replace brake pads when
wear lines are no longer visible, or when pad thickness reaches 1.5 mm.
The shielded pad must be installed on the non-piston side of the caliper.
See the VICTORY Service Manual or your authorized VICTORY dealer.
Inspect brake discs for nicks, scratches, cracks or other damage. Inspect
the thickness of each brake disc at four or more locations around the
disc. Minimum thickness is stamped on the inner hub of the disc. If any
disc is worn to the minimum thickness at the thinnest point, or if a disc is
damaged, see your VICTORY dealer for replacement.