Brake Lever Lubrication - Polaris 2010 Vegas Owner's Manual

Victory motorcycles 2010 owner’s manual
Table of Contents

Advertisement

Brake Systems

Brake Lever Lubrication

Lubricate at the intervals recommended in the periodic maintenance table beginning on page 72.
1. Remove the right side mirror.
2. Remove the brake lever pivot nut (10 mm wrench or socket) and pin (4 mm hexagonal wrench).
Tip: Note the direction the plunger is installed (if removing). Proper direction is critical for brake function.
3. Remove any old grease and dirt from the lever and housing.
4. Lubricate the lever and pivot pin with VICTORY All
Purpose Grease or equivalent.
5. Reinstall the lever and pivot pin.
Torque: 52 in-lbs (6 Nm)
6. Reinstall the pivot nut.
Torque: 52 in-lbs (6 Nm)
7. Check front brake lever movement. See page 50.
8. Reinstall the right side mirror and adjust.
Maintenance
Large diameter end
toward lever
107

Hide quick links:

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the 2010 Vegas and is the answer not in the manual?

Subscribe to Our Youtube Channel

Table of Contents