Testing the installed
memory
Running PHDISK
Installing Memory Modules
8. Replace the memory expansion door and
reinstall the screws.
9. Reinstall the internal battery pack and
connect the AC adapter.
After installing the memory, follow these steps
to make sure the memory is working properly.
1. Insert the battery pack.
2. Connect the AC adapter.
3. Turn on the computer.
As the computer completes its self test, you
should see that the memory has increased
correctly.
You must run the PHDISK utility after installing
additional memory to increase the size of the
save-to-disk (0V Suspend) file.
Installing Internal Accessories 3-5