Operating The Dishwasher - Blomberg GVN 9483 E Instruction Manual

Operating the dishwasher

·
Push in the on/off button and check that the programme indicator lights come on.
·
Check the salt and rinse aid level indicator lights before you start the machine. If necessary add salt and rinse aid.
·
Select the required programme by referring to the programme chart.
·
Select the desired programme by using the Programme Selection Button.
·
You may use Half Load/Combi Tablet button - Delayed Start Button features as necessary.
·
Press start/pause/cancel button.
·
Close the door then programme starts.
·
An audio signal with an interval of 8 seconds warns you to switch your machine off when the selected washing
programme ends. This audible signal will warn you 10 times before it turns off.
!
Do not open the dishwasher door whilst the appliance is in operation. However, in case the door is opened
while the machine is working, then a safety mechanism ensures the machine immediately stops. Water may be
very hot, so be careful.
·
Care must be taken if opening the door, as steam and water will escape.
·
Press the on/off button after the programme is completed. The indicator lights will go off.
·
Unload the baskets - we recommend to turn off the water tap when not in use.
How to cancel the washing programme
To cancel a programme while the machine is operating:
· Open the door.
! Care must be taken when opening the door, as steam will escape.
· Press and hold start/pause/cancel button for 3 seconds. The start / stop indicator light will start flashing. Close
the door. The machine will drain the water inside the machine for 45 seconds.
· The programme is cancelled when start/stop indicator light goes off. Then, you can choose and start a new
programme.
!
Depending on the stage of the programme you have cancelled, there may be detergent residue or rinse aid
inside the machine and on the load. Make sure the items in the dishwasher are not used before washing properly.
How to change the washing programme
To change the programme selection while the machine is operating:
· Open the door.
! Care must be taken when opening the door, as steam will escape.
· Press start/pause/cancel button. The indicator light will go off.
·
Select the new programme. Press start/pause/cancel button. The indicator light will be on and new programme
will start.
!
The new programme will NOT start right from the beginning. It will start from the stage last carried out
by the previous programme selection.
Half Load Function
If you want to run your machine without loading it completely, place your dishes into the machine as you desire.
Press the On/Off button to turn on your machine. Press the Half Load/Combi Tablet button after selecting the
desired program until Half Load Indicator lights up, then press start/pause/cancel button and close the door of
your machine. With the Half Load option you can use every part of your lower and upper baskets and you can
save by using less water and power.
Tablet Detergent Function
Depending on the hardness level of the tap water, the Tablet Detergent function allows obtaining a better drying
performance from the multi-purpose detergents such as 2in1, 3in1, 4in1, 5in1, etc., called all-in-one tablets.
The programmes in which the tablet detergent function can be enabled are indicated in the Programme Data
and Table of Average Consumption Values. Tablet Detergent Indicator lights when the Tablet Detergent function
is selected. Salt and Rinse Agent indicators turn off when this function is activated.
Time Delay
Using the Delayed Start button, you may delay the starting time of your programme up to 9.5 hours with
increments of 30 minutes. After delaying the start, press Start/Cancel button and close the door of your machine.
Once the delay time is over, the selected programme will start automatically.
Cancelling the delay function
Keep the Start/pause/cancel button pressed for 3 seconds. The selected delay period will be cancelled.
As soon as the cancelling starts, the water remaining in your machine will be drained for 30 seconds due to
safety reasons.
17 9010 01 00-AA