How To Operate A Window; How To Stop The Test Program; Test Status Screen; Common Tests And Operation - Toshiba Satellite P300 Maintenance Manual

3.21 Common Tests and Operation

3.21.1 How to operate a window

To input parameters, or open a window use the following keys.
key
[Enter] key
[Esc] key

3.21.2 How to Stop the Test Program

To stop a test:
[Ctrl]+[Break]

3.21.3 Test Status Screen

NOTE: The Test Status Screen does not display during all the tests. See the specific test
description Sections 3.4 through 3.14.
The following Test Status screen displays during most tests. See the description of each test
Sections 3.4 through 3.14 for specific screen information.
Test Name
Sub Test
Pass Count
Write Data
Address
Test Name
Subtest No.
64
: to move a highlight bar
: to select an item at the highlight bar
: to close the current window and go back to the previous
window
Press the Ctrl key and the Break key simultaneously.
:0101
:00000 Error Count
:00 Read Data
:00000000 Status
Displays the name of the test being executed.
Displays the Subtest number in the following format:
ffgg
ff = Subtest No.
gg = Step Number (Will be blank if the test does not have a
Step Number.)
Satellite P300 and Satellite Pro P300 Tests and Diagnostics Manual
Test Program for Field.
:00000
:00
:00