Repair Guide; Precautions In Disassembly And Reassembly - Hitachi C 6DC2 Technical And Service Manual

Cordless circular saw

Hide thumbs Also See for C 6DC2:

Table of Contents

9. REPAIR GUIDE

[WARNING]

Without fail, remove the storage battery from the main body of the tool before starting repair or

maintenance work. If the battery is left in and the switch is activated inadvertently, the motor will start

rotating unexpectedly, which could cause serious injury.

The [Bold] numbers in the description below correspond to the item numbers in the Parts List and the exploded

assembly diagram for the Model C 6DC2.

9-1-1. Disassembly

(1) Removal of the TCT Saw Blade [11]

While pressing the Lock Lever [22], turn the Bolt (W/Washer) M7 x 17.5 [13] clockwise with the attached Box

Wrench 10 mm [502] to fix the saw blade shaft. Turn the Bolt (W/Washer) M7 x 17.5 [13] counterclockwise

with the Box Wrench 10 mm [502] to loosen it. Remove Washer (B1) [12], the TCT Saw Blade [11], the Ring

D15.9/I.D14.5 [10] and Washer (A1) or (A2) [9]. Handle the saw blade with care to avoid injury. The Ring

D15.9/I.D14.5 [10] is not provided for Australia and New Zealand (GD and HD work).

[11]

[10]

[9]

Fig. 1

--- 11 ---

[13]

[12]

Table of Contents