Servicing method
4.7. Removing the D-Board
1. Remove the rear cover(See 5.2.)
2. Disconnect the coupler(D1,D2).
3. Remove the fixing screws(2pcs).
4. Remove the D-Board.
4.8. Removing the Speaker unit
1. Remove the rear cover(See 5.2.)
2. Remove the fixing screws(8pcs).
3. Disconnect the coupler(A1), and unlock the
cable clamper and hook to free the cable.
4. Remove the speaker units.
Clamper
Speaker
Coupler(D2)
Coupler(D1)
4.9. Removing the BRKT hinge
1. Remove the rear cover(See 5.2.)
2. Remove the fixing screws(6pcs).
3. Remove the BRKT hinge.
4.10. Removing the Shield pcb assy.
1. Remove the Switch unit(See 5.3.)
2. Remove the BRKT hinge(See 5.9.)
3. Remove the fixing screws(10pcs).
4.Disconnect the coupler (A1), (A2), (A3),
(A4), (E1).
5. Remove the Shield pcb assy.
Coupler(A1)
7
BRKT hinge
Shield pcb assy
Coupler(A1)
Coupler(A2)
Coupler(A3)
Coupler(A4)
Coupler(E1)