Removing The Dg-Board - Panasonic TX-26LXD52 Service Manual

7.8.

Removing the DG-Board

1. Remove the rear AV bracket (See 7.4.) and the rear metal
frame. (See 7.5.)
2. Disconnect the couplers (DG6 and DG7), the flexible cable
(DG3) and the bridge cables (DG4 and DG5).
3. Remove the fixing screws (7pcs).
4. Remove the DG-Board with DV-Board.
7.9. Removing the DV-Board
1. Remove the DG-Board with DV-Board. (See 7.8.)
(See above figure in item 7.8.)
2. Remove a fixing screw (
copper foil sheet carefully not to brake.
3. Disconnect the coupler (DV15-DG10) and remove the DV-
Board.
TX-32LXD52 / TX-26LXD52 / TX-32LX52F / TX-26LX52F / TX-32LX52L / TX-26LX52L / TX-32LX51F / TX-26LX51
) (reverse side) and remove the
7.10. Removing the AP-Board
1. Remove the rear AV bracket ass´y (See 6.4.) and the rear
metal frame. (See 6.5.)
2. Disconnect the couplers (AP2, AP6 and AP10 (AC Cord))
and the bridge cables (H1 (AP1) on the H-Board, P3/CN201
(AP3) on the P-Board and DG4 (AP4) and DG5 (AP5) on
the DG-Board.
3. Remove the fixing screws (7pcs).
4. Remove the AP-Board.
7.11. Removing the H-Board
1. Remove the rear AV bracket (See 7.4.) (and the rear metal
frame). (See 7.5.)
2. Disconnect the flexible cable (H3), the bridge cable (H1)
and the couplers (H4 and H5).
3. Remove the fixing screws (4pcs).
4. Remove the H-Board.
15