Wireless Connection Settings - Panasonic Viera TC-L42E5H Operating Instructions Manual

4
Select [Connection Test] and access to test
Connection Test Access
Connection Test
Check network cable connection.
Check acquired IP address.
Check for devices using same IP address.
Check gateway connection.
Check server connection.

Wireless connection settings

This setting is for the wireless network connection.
● Confirm the encryption key, settings and positions of your access point before starting setup. For details, read the manual of
the access point.
1
Select [Network Connection] and set to [Wireless]
Connection Test
Network Connection Wireless
Wireless Network Settings
IP/DNS Settings
Network Link Settings
Software Update
New Software Message On
Network Status
2
Select [Wireless Network Settings]
Connection Test
Network Connection Wireless
Wireless Network Settings Access
IP/DNS Settings
Network Link Settings
Software Update
New Software Message On
Network Status
3
Select your desired access point
Available Wireless Networks
No. Network Name(SSID) Wireless type
1 11n(2.4GHz)
Access Point A
2 11n(5GHz)
Access Point B
3 Access Point C 11n(5GHz)
● To search access points
again
4
Access the encryption key input mode (English only)
Encryption Key Setting
Connection will be made with the following settings:-
Network Name(SSID) : Access Point A
Authentication type : WPA-PSK
Security type : TKIP
Please input the encryption key.
Encryption key
select
access
●
Performs automatic testing of the network connection for the TV. (It takes a while to
test.)
: succeeded
The test is successful and the TV is connected to the network.
: failed
Check the settings and connections. And then select [Retry].
select
access / store
select
access
● When the access point is already set, [Current Settings] screen will be displayed.
To change the settings, select [No] on this screen and go to the next step.
select
Status
access
: Encrypted access point
● To set [WPS(Push button)]
(p. 16)
●
If the selected access point is not encrypted, the confirmation screen will be displayed.
It is recommended to select the encrypted access point.
●
For the information of the highlighted access
point
● To set manually ● To set [WPS(PIN)]
(p. 56) (p. 56)
55