Panasonic Viera TC-L42E5H Operating Instructions Manual page 37

42” class 1080p lcd hdtv (42.0 inches measured diagonally)
Table of Contents

Advertisement

Available languages

Available languages

Update Digital TV channel automatically [Update Channel List] (Digital TV)
You can add new channels, delete removed channels, update channel name and position automatically to the channel list.
Digital TV Update Channel List
Scan
CH 5
This will take about 3 minutes.
CH
Channel Name
Type
Display a notification message [New Channel Message] (Digital TV)
Selects whether to give a notification message when a new Digital TV channel is found.
New channels found!
Press OK to update channel list.
Press EXIT to ignore.
Check Digital TV signal [Signal Condition] (Digital TV)
Selects a channel and checks the Digital TV signal condition.
A good Signal Strength is not an indication of suitable signal for Digital TV reception.
Use the Signal Quality indicator as follows.
Green bar: Good
Yellow bar: Poor
Red bar: Bad (Check the aerial)
Example:
Digital TV Signal Condition
Channel Name
05.1 DZFinfokanal
Signal Quality
Signal Strength
Network Name
Wenvoe
[CH32]
562.00 MHz
Parameter
Auto Tuning using the buttons on the TV
For Auto Tuning, using the buttons on the TV (p. 10)
1
Press the F button repeatedly until [Auto Tuning] appears
2
Access [Auto Tuning]
3
Start [Auto Tuning]
The channel list is updated while keeping your settings in [Favourites Edit], [Channel
69
List], [Child Lock], etc.
Depending on the signal condition, the update may not work properly.
Quality
Selecting OK will perform [Update Channel List].
These bars show the maximum signal value of the selected
channel.
To change the channel
To return to TV
Control panel OSD appears when
pressing the control panel button.
37

Hide quick links:

Advertisement

Chapters

Table of Contents
loading

Table of Contents