Encrypted Only
If you select Encrypted Only, the user can only see the encrypted drive while the
normal drive is hidden.
Note: This function can be only supported on Windows 98/Me/XP or Windows 2000 with SP4 and
the function of dividing partition is enabled.
Memory Info
After entering Sys Function menu page, select Memory Info by pressing
MODE/CONFIRM button to check the used memory. The used memory will be
shown on the display.
Firmware Version
After entering Sys Function menu page, select Firmware Version by pressing
MODE/CONFIRM. The date code, version of the firmware will be shown on the
display for reference.
Firmware Upgrade
It will be used when there is an upgrade of firmware.
Note: It is highly recommend upgrading the firmware by the qualified engineer to prevent
from any damages caused to the player.
Line-in Function
1 After entering Main Menu page, select Record and press MODE button to enter
Record mode.
2 Connect the Line-in Jack and the music source with Line-in cable. Gnerally the
music source here would be any A/V products.
3 Press MODE/CONFIRM button to confirm the selection and then press REC to
start recording. You are allowed to press PAUSE/STOP button to pause or stop
the recording
18
English