Snooze Control - Hyundai H-1525 Instruction Manual

exhausted or there may be some deviation in
accuracy.
• When the battery is exhausted, it should
be removed from the set to prevent leakage.
If you do not wish to take advantage of the
battery back-up system, your set will work
normally without a battery. However, if
disconnected from the mains, the clock figures
will flash when the mains are re-connected and
you must re-set the clock.
AС operation
• The appliance is for household use only.
• Before the first connecting of the appliance
check that voltage indicated on the rating label
corresponds the mains voltage in your home.
• Insert the plug into the power supply.
• The set is now working as an electronic
clock. Figures will blink on the display, showing
that you should set the clock.
Setting the clock
• Press and hold TIME button.
• Do not release TIME button; press HOUR
button or MIN button to set the clock display to
the correct time.
• Release all the buttons when finished the
setting.
Radio operation
Tuner operations
• Slide ON/OFF/AUTO/BUZZ switch to ON
and turn on the volume.
• Slide AM/FM switch to AM or FM position.
• Adjust the program using TUNING
regulator.
• Use VOLUME regulator to adjust volume
level.
Sleep to music
The radio can be set to play and to switch off
automatically after a preset time.
Instruction manual
• Slide ON/OFF/AUTO/BUZZ switch to OFF
or AUTO position.
• Press SLEEP button once.
• You can have 59 minutes playing the radio
to accompany you to sleep.
• To set for a desired period of sleep
(maximum 1 hour 59 minutes), simply press
and hold SLEEP button and then press HOUR
button or MIN button to set the desired period
of the sleep function.
• To turn off the radio before sleep time
expires, press SNOOZE button once.
Alarm operation
Setting the alarm
• Press and hold ALARM button.
• Without releasing ALARM button, press
HOUR button or MIN button to set the desired
wake up time.
• Release ALARM button to show the
current time.
• Slide ON/OFF/AUTO/BUZZ to AUTO
position. The radio will play automatically at the
present time.
Alarm sound setting
Follow the steps of "Setting the alarm" and
slide ON/OFF/AUTO/BUZZ switch to BUZZ
position. You will be awakened by the buzzer
alarm.

Snooze control

• When the alarm is on, press SNOOZE
button once, after approximately 9 minutes the
alarm will be on again.
• If you want to stop the alarm, switch ON/
OFF/AUTO/BUZZ to OFF position or press
AL.OFF button.
Laser projection
• The unit is equipped with a laser projection
with individual time setting.
3